Description

The LP200 Air Pump quietly delivers a maximum high volume air output of 250 litres per minute, which is suitable for large fish and koi ponds as well as hydroponic systems. It should be housed in a low dust environment, but can withstand rain and water sprinkling.

Note: Must be set-up above the water level and should be placed in a low dust environment but will tolerate rain and light sprinkling

• Rated Power: 200W
• Flow Rate: 250L/min
• Maximum pressure: 0.045Mpa
• Outlets: 33 on 50mm manifold

Adding oxygen or pond aeration into a fish pond is very important for fish health, particularly in densely stocked koi fish ponds and in the summer months when oxygen levels decline. Fish will become visibly more active in an oxygen-rich pond.

Also used for: Aquaponic Aerobic Mineralizer, Hydroponic Systems, Waste water treatment aeration, Deep water septic tank aeration, Natural swimming pond aeration, Aquaculture pond aeration, Commercial and industrial water aeration, Koi Ponds

Additional information

Blower performance comparison for the Resun LP-200 and the Hiblow HP-200

We can supply the Hiblow HP-200 as an import. Usually, we need to import at least 6 units at a time. They work out at 2.5 to 3 times the price of the LP-200 due to exchange rates.

Here is the Hiblow HP-200 blower curve

The Hiblow HP-200 delivers 200 liters per minute at 200 millibar. This would be about 1.7m of water if we allow 30mbar for friction losses in pipes and diffusers. The purple line is the South African 50 Hertz power. On the image above in this page, the LP-200 will deliver 140lpm under the same conditions. The LP-200 is rated as 200 watt at 50Hz and the Hiblow HP-200 as 210 watts.