PC 80+ DHS Bench Meter STIRRER with pH electrode XS STANDARD T-BNC

Description

PC 80+ DHS

pH – mV – Ion – COND – TDS – Salinity – Resistivity Temperature – GLP GMP – Data Logger

PC 80+ DHS kit STIRRER with pH electrode XS STANDARD T-BNC DHS, glass body conductivity cell VPT80/1 with ATC, cable S7/BNC, temperature probe NT 55, colored buffer solutions pH 7 and pH 4, conductivity standards 1413 μS and 12,88 mS, power supply and accessories, with stirrer.

Main features

• Simultaneous display of pH / mV / ISE and temperature, COND / TDS / Salinity / Resistivity and temperature
• Selectable pH resolution: 0,1/0,01/0,001; automatic scale for COND
• 5 points: Automatic and Manual pH calibration
• 5 points Automatic calibration with the Ion (ISE) electrode
• 4 points Cond Automatic calibration and 1 point Manual calibration
• Compensation for Ultrapure water for low conductivity measurement
• Selectable cell constant with saving and recall calibration for each cell constant
• Wide colored display with indication of calibration standards, solution used
  and measurement stability
• Memory recall of pH, ISE, and Cond last calibration date and time, and
  Information about the condition of the sensor
• Calibration Timer of pH, IS, E, and Cond
• Stability filter (Tit – Medium – High)
• An alphanumeric password for calibration management and data memory deletion with a soft keypad included
• Non-volatile memory holds up to 1000 data points, with date and time, in automatic (Data logger) or manual, downloadable on PC with free software
  “DataLink” or a printable
• Stirrer plate included
• 2 USB ports for downloading PC data and for an external keyboard are included
• RS232 port for printer connection
• Multilingual menu setup
• Quick online manual
• GLP and IQ-OQ manual available

PC 80+ DHS Specifications

• pH Measuring Range: -2…20
• Resolution / Accuracy (pH): 0.1 / 0.01 / 0.001 / ±0.002
• Calibration Points (pH): 1…5
• Buffer Auto Recognition: USA, NIST, DIN, 5 defined by user
• Indication of Calibration Points: Yes
• GLP Calibration: Yes, with date and time
• Electrode Condition Indication: Yes, icon and graph
• Calibration Timer with Alarm: Yes
• Stability Filter: Tit – Medium – High
• Alarm Settings for Measurement: MIN–MAX
• mV Measurement:
• Range (redox): ±2000
• Resolution: 0.1 / 1
• Ion Measurement (ISE):
• Range: 0.001…19999 ppm
• Units: mol/L – mg/L – g/L
• Ion Calibration Points: –
• Conductivity (COND):
• Measuring Range:
• 0.00…20.00 – 200.0 – 2000 µS
• 2.00…20.00 – 200.0 – 1000 mS
• Resolution: Automatic scale
• Accuracy: ±1% full scale
• Calibration Points: 1…4
• Buffer Auto Recognition: 84, 1413 µS, 12.88, 111.8 mS, 1 defined by user
• Temperature Coefficient: Ultrapure Water and 0.00…10.00 %/°C
• Reference Temperature: 15…30 °C
• GLP Calibration (COND): Yes, with date and time
• Condition of Cell Indication: Yes, icon
• Calibration Timer with Alarm (COND): Yes
• Cell Type: 2 poles
• Cell Constant: 0.1 – 1 – 10
• TDS Measurement:
• Range: 0.1 mg/L…500 g/L
• TDS Factor / Accuracy: 0.40…1.00 / ±1% full scale
• Salinity Measurement:
• Range / Accuracy: 0.01…100 ppt / ±1% full scale
• Resistivity Measurement:
• Range / Accuracy: 1…10 MΩ / ±1% full scale
• Temperature Measurement:
• Range / Accuracy: -20.0…120.0 °C / ±0.5 °C
• Temperature Compensation: Automatic or Manual 0…100 °C (NTC 30KΩ)
• GLP System:
• Password: Yes, alphanumeric
• Memory: MAN/AUTO 1000 data, with date and time
• Display: Multicolor dot matrix, with icons, digital view, or analog view
• Input:
• 2 BNC
• 2 Cinch/RCA (ATC)
• RS-232 for the printer
• USB for PC and USB for the external keyboard
• Languages: 8 selectable
• Online Manual: Yes
• Magnetic Stirrer: Included
• Speed Control: 0…3000 rpm
• IP Protection: IP 54
• Power Supply: AC/DC adaptor 12V / 1000mA
• Dimensions: 165 x 195 x 86 mm
• Weight: 1050 g (without stirrer)

DHS Digital High Sensor Intelligent sensors management

Digital High Sensors are the latest pH sensors equipped with an internal chip that stores parameters, including the date of last calibration, model, and production batch of the electrode. In the instruments PC 8+ DHS and PC 80+ DHS, a special chip with the same technology is used. After connecting the pH DHS sensor to the instrument, all the data stored in the sensor chip is automatically transferred to the instrument. The display will show on a screen: DHS, sensor model, production batch, date, and hour of the last calibration. After a new calibration of the DHS electrode, the data is automatically stored in the electrode chip. If we move this electrode to another DHS-enabled instrument, we can start working immediately and with extreme security, as the data from the last calibration will automatically be transferred and used for pH measurements. New DHS pH sensors do not have an internal battery, so they can be stored as a normal pH electrode and do not use special connectors, but a normal BNC. Many manufacturers using digital sensors have developed dedicated meters for these sensors. This imposes a full range of digital sensors for a variety of applications or lab requirements. Our research and development team has designed this new line of instruments to work with the new DHS digital sensors and the normal analog pH sensors, all brands, which can be connected to the same pH meter. From now on, the pH measurement will be simpler.

Additional information