PC 8+ DHS kit STIRRER with pH electrode XS Polymer

Description

PC 8+ DHS kit STIRRER with pH electrode XS Polymer

pH – mV – COND – TDS – Salinity – Temperature – GLP – Data Logger

PC 8+ DHS kit STIRRER with pH electrode XS Polymer, cable S7/BNC, temperature probe NT 55, conductivity cell 2301T in epoxy with ATC, colored buffer solutions pH 7 and pH 4, conductivity standards 1413 μS and 12,88 mS, power supply and accessories. With a stirrer.

Features

• Simultaneous display of pH / mV and temperature, Cond / TDS / Salinity, and temperature
• Selectable resolution: 0,1/0,01 pH; Automatic scale on Cond
• 3 points pH Automatic calibration and 2 points Manual calibration
• 4 points Cond Automatic calibration and 1 point Manual calibration
• Selectable cell constant with saving and recall calibration for each cell constant
• Stability filter (Tit-Med-High)
• Large colored display with indication of Calibration standard used and measurement’s stability
• Stirrer plate included
• Numeric password for calibration management and data memory deletion
• Memory recall of the last pH and Cond calibration, date, and time
  and information about the condition of the sensors
• Calibration Timer: Set the frequency of the calibration for high-quality measurements
• Non-volatile memory holds up to 1000 data points, with date and time, in automatic (Data logger)
  or manually, downloadable on PC with free software “DataLink”, or printable
• Multilingual menu setup
• 3-year warranty

PC 8+ DHS Specifications

• pH Measuring Range: -2…16
• Resolution / Accuracy (pH): 0.1 / 0.01 / ±0.002
• Calibration Points (pH): 1…3
• Buffer Auto Recognition: USA, NIST, 2 defined by user
• Indication of Calibration Points: Yes
• GLP Calibration: Yes, with date and time
• Electrode Condition Indication: Yes, icon and graph
• Calibration Timer with Alarm: Yes
• Stability Filter: Tit – Medium – High
• Alarm Settings for Measurement: MIN–MAX
• mV Measurement:
• Range (redox): ±2000
• Resolution: 1
• Ion Measurement (ISE):
• Not specified
• Conductivity (COND):
• Measuring Range:
• 0.00…20.00 – 200.0 – 2000 µS
• 2.00…20.00 – 200.0 – 200.0 mS
• Resolution: Automatic scale
• Accuracy: ±1% full scale
• Calibration Points: 1…4
• Buffer Auto Recognition: 84, 1413 µS, 12.88, 111.8 mS, 1 defined by user
• Temperature Coefficient: 0.00…10.00 %/°C
• Reference Temperature: 15…30 °C
• GLP Calibration (COND): Yes, with date and time
• Condition of Cell Indication: Yes, icon
• Calibration Timer with Alarm (COND): Yes
• Cell Type: 2 poles
• Cell Constant: 0.1 – 1 – 10
• TDS Measurement:
• Range: 0.1 mg/L…1000 g/L
• TDS Factor / Accuracy: 0.40…1.00 / ±1% full scale
• Salinity Measurement:
• Range / Accuracy: 0.01…100 ppt / ±1% full scale
• Resistivity Measurement:
• Range / Accuracy: 1…10 MΩ / ±1% full scale
• Temperature Measurement:
• Range / Accuracy: -10.0…110.0 °C / ±0.5 °C
• Temperature Compensation: Automatic or Manual 0…100 °C (NTC 30KΩ)
• GLP System:
• Password: Yes, numeric
• Memory: MAN/AUTO 1000 data, with date and time
• Display: Multicolor dot matrix, with icons, digital view or analogical view
• Input:
• 2 BNC
• 2 Cinch/RCA (ATC)
• RS-232 for the printer
• USB for PC connection
• Languages: 8 selectable
• Online Manual: Yes
• Magnetic Stirrer: Included
• Speed Control: 0…3000 rpm
• IP Protection: IP 54
• Power Supply: AC/DC adaptor 12V / 1000mA
• Dimensions: 165 x 195 x 86 mm
• Weight: 1050 g (without stirrer)

DHS Digital High Sensor Intelligent sensors management

Digital High Sensors are the new pH sensors with an internal chip that stores parameters, date of last calibration, model, and production batch of the electrode. In the instruments PC 8+ DHS and PC 80+ DHS, a special chip with the same technology is used. After connecting the pH DHS sensor to the instrument, all the data stored in the sensor chip is automatically transferred to the instrument. The display will show on a screen: DHS, sensor model, production batch, date, and hour of the last calibration. After a new calibration of the DHS electrode, the data is automatically stored in the electrode chip. If we move this electrode to another DHS-enabled instrument, we can start working immediately and with extreme security, as the data from the last calibration will automatically be transferred and used for pH measurements. New DHS pH sensors do not have an internal battery, so they can be stored as a normal pH electrode and do not use special connectors, but a normal BNC. Many manufacturers using digital sensors have developed dedicated meters for these sensors. This imposes a full range of digital sensors for a variety of applications or lab requirements. Our research and development team has designed this new line of instruments to work with the new DHS digital sensors and the normal analog pH sensors, all brands, which can be connected to the same pH meter. From now on, the pH measurement will be simpler.

Additional information